Product catagories

Search Products

785UD7 High-Performance Finishing Carbide Corner-Chamfer End Mills

$59.99

Bulk orders will be discounted, please contact us.

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

Product Number: 785UD7

Add to Wishlist Add to Compare

SEND INQUIRY

  • Description
Mfr Model 4X0EM12005CCT WS15PE
Material Machining Carbide
Finish Machining AlTiN
Measurement System Metric
Milling Dia 2.00 mm
Length of Cut 24.00 mm
Overall Length 83.00 mm
Shank Dia 12.00 mm
Shank Type Machining Straight
End Mill Style Corner Chamfer
Number of Flutes 4
End Mill Application Drilling; Helical Milling; Plunge Milling; Ramping :; Side Milling/Shoulder Milling: Square End; Slotting: Square End; Trochoidal Milling
Drilling Tool Configuration Individual
End Mill Cutting Type Center Cutting
List Number 4X0E
Material Grade Machining WS15PE
Primary Material Application Cast Iron; Hardened Materials; High-Temp Alloys; Stainless Steel; Steel
Primary Material Application ISO Code H; K; M; P; S
UNSPSC 23172005
Country of Origin Israel (subject to change)
Material Applications Cast Iron; Hardened Materials; High-Temp Alloys; Stainless Steel; Steel
Flute Type Helical
Coolant Fed Non-Coolant Through
Secondary Material Application Super Alloy
Secondary Material Application ISO Code S
Helix Angle 38 °
Cutting Direction Right Hand
Neck Length 22.00 mm
Chamfer Width 0.30 mm
Chamfer Angle 45 °
Pitch Chip Breaker
Max Helix Angle 30 °

You may also like

× Success！success