Product catagories

Search Products

FilterClear All

Inquiry

High-Performance Roughing Carbide Corner-Radius End Mills

product-img product-img

60UF21 | High-Performance Roughing Carbide Corner-Radius End Mills

$45.13

The diamond-like carbon (DLC) coating on these end mills protects them from wear when milling abrasive materials such as stainless steel, ceramics, plastics, and aluminum alloys. DLC-coated end mills are a cost-effective alternative to diamond-coated end mills.

+ Add to Cart
product-img product-img

60UF22 | High-Performance Roughing Carbide Corner-Radius End Mills

$45.13

The diamond-like carbon (DLC) coating on these end mills protects them from wear when milling abrasive materials such as stainless steel, ceramics, plastics, and aluminum alloys. DLC-coated end mills are a cost-effective alternative to diamond-coated end mills.

+ Add to Cart
product-img product-img

60UF23 | High-Performance Roughing Carbide Corner-Radius End Mills

$45.13

The diamond-like carbon (DLC) coating on these end mills protects them from wear when milling abrasive materials such as stainless steel, ceramics, plastics, and aluminum alloys. DLC-coated end mills are a cost-effective alternative to diamond-coated end mills.

+ Add to Cart
product-img product-img

60UF25 | High-Performance Roughing Carbide Corner-Radius End Mills

$59.99

The diamond-like carbon (DLC) coating on these end mills protects them from wear when milling abrasive materials such as stainless steel, ceramics, plastics, and aluminum alloys. DLC-coated end mills are a cost-effective alternative to diamond-coated end mills.

+ Add to Cart
product-img product-img

60UF26 | High-Performance Roughing Carbide Corner-Radius End Mills

$65.32

The diamond-like carbon (DLC) coating on these end mills protects them from wear when milling abrasive materials such as stainless steel, ceramics, plastics, and aluminum alloys. DLC-coated end mills are a cost-effective alternative to diamond-coated end mills.

+ Add to Cart
product-img product-img

60UF27 | High-Performance Roughing Carbide Corner-Radius End Mills

$85.73

The diamond-like carbon (DLC) coating on these end mills protects them from wear when milling abrasive materials such as stainless steel, ceramics, plastics, and aluminum alloys. DLC-coated end mills are a cost-effective alternative to diamond-coated end mills.

+ Add to Cart
product-img product-img

60UF28 | High-Performance Roughing Carbide Corner-Radius End Mills

$39.76

The diamond-like carbon (DLC) coating on these end mills protects them from wear when milling abrasive materials such as stainless steel, ceramics, plastics, and aluminum alloys. DLC-coated end mills are a cost-effective alternative to diamond-coated end mills.

+ Add to Cart
product-img product-img

60UF29 | High-Performance Roughing Carbide Corner-Radius End Mills

$43.59

The diamond-like carbon (DLC) coating on these end mills protects them from wear when milling abrasive materials such as stainless steel, ceramics, plastics, and aluminum alloys. DLC-coated end mills are a cost-effective alternative to diamond-coated end mills.

+ Add to Cart
product-img product-img

60UF30 | High-Performance Roughing Carbide Corner-Radius End Mills

$43.59

The diamond-like carbon (DLC) coating on these end mills protects them from wear when milling abrasive materials such as stainless steel, ceramics, plastics, and aluminum alloys. DLC-coated end mills are a cost-effective alternative to diamond-coated end mills.

+ Add to Cart
product-img product-img

60UF31 | High-Performance Roughing Carbide Corner-Radius End Mills

$43.59

The diamond-like carbon (DLC) coating on these end mills protects them from wear when milling abrasive materials such as stainless steel, ceramics, plastics, and aluminum alloys. DLC-coated end mills are a cost-effective alternative to diamond-coated end mills.

+ Add to Cart
product-img product-img

60UF32 | High-Performance Roughing Carbide Corner-Radius End Mills

$53.83

The diamond-like carbon (DLC) coating on these end mills protects them from wear when milling abrasive materials such as stainless steel, ceramics, plastics, and aluminum alloys. DLC-coated end mills are a cost-effective alternative to diamond-coated end mills.

+ Add to Cart
product-img product-img

33TP91 | High-Performance Roughing Carbide Corner-Radius End Mills

$70.70

The TiN coating on these end mills protects them from wear and resists impact better than TiAlN and AlTiN coatings.

+ Add to Cart
product-img product-img

48HY17 | High-Performance Roughing Carbide Corner-Radius End Mills

$32.96

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

48HY18 | High-Performance Roughing Carbide Corner-Radius End Mills

$37.35

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

48HY19 | High-Performance Roughing Carbide Corner-Radius End Mills

$42.70

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

48HY20 | High-Performance Roughing Carbide Corner-Radius End Mills

$55.19

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

48HY21 | High-Performance Roughing Carbide Corner-Radius End Mills

$81.41

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

48HY22 | High-Performance Roughing Carbide Corner-Radius End Mills

$147.35

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

48HY26 | High-Performance Roughing Carbide Corner-Radius End Mills

$356.37

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

48HY27 | High-Performance Roughing Carbide Corner-Radius End Mills

$30.21

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

48HY30 | High-Performance Roughing Carbide Corner-Radius End Mills

$45.63

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

48HY33 | High-Performance Roughing Carbide Corner-Radius End Mills

$176.18

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

48JN77 | High-Performance Roughing Carbide Corner-Radius End Mills

$110.62

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

48JN78 | High-Performance Roughing Carbide Corner-Radius End Mills

$237.50

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

48JN80 | High-Performance Roughing Carbide Corner-Radius End Mills

$343.57

The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.

+ Add to Cart
product-img product-img

48LG68 | High-Performance Roughing Carbide Corner-Radius End Mills

$209.17

The TiAlN coating on these end mills withstands high temperatures and protects them from wear. It allows the end mills to be used at faster speeds than end mills with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings.

+ Add to Cart
product-img product-img

55FF80 | High-Performance Roughing Carbide Corner-Radius End Mills

$373.66

The WXL coating on these end mills protects them from wear and is designed for milling nonferrous metals and steels with a Rockwell hardness of up to 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart
product-img product-img

55FF82 | High-Performance Roughing Carbide Corner-Radius End Mills

$440.02

The WXL coating on these end mills protects them from wear and is designed for milling nonferrous metals and steels with a Rockwell hardness of up to 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart
product-img product-img

55FG24 | High-Performance Roughing Carbide Corner-Radius End Mills

$123.49

The WXL coating on these end mills protects them from wear and is designed for milling nonferrous metals and steels with a Rockwell hardness of up to 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart
product-img product-img

55FG26 | High-Performance Roughing Carbide Corner-Radius End Mills

$135.84

The WXL coating on these end mills protects them from wear and is designed for milling nonferrous metals and steels with a Rockwell hardness of up to 50 HRC. It is harder and has a higher oxidation temperature than a TiAlN coating.

+ Add to Cart
× Success！success